Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Need SSPC or NACE-qualified inspection service

I'm looking for an inspector in or around Knoxville, TN that can perform ASTM D3359. The inspector needs to be qualified through either SSPC or NACE.

James Murphey
Distributor - Huntersville, North Carolina
January 22, 2010

Ed. note: Sorry, this RFQ is old & outdated, so contact info is no longer available. However, if you feel that something technical should be said in reply, please post it; no public commercial suggestions please ( huh? why?)

Q. I want to enquire about the requirements and options of state and country for corrosion control school for NACE? Thanks, Jacob.

Mathias Jacob Okoh
De Jakes Integrated Services - Port Harcourt, Rivers state, Nigeria
July 13, 2018

A. Hi Jacob. The best place to see their schedules starts at https://www.nace.org/cstm/Education/Courses/CourseSchedule.aspx
It looks like there is a technologist course in Lagos in October, but there are many other classes in other locations. Good luck.

Regards,

Ted Mooney, P.E. RET
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
July 2018

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: