Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

How can we do chrome plating on black bakelite

how we can do the chrome plating on bakelite

Manish Km
plater - India
September 29, 2009

September 29, 2009

Hi, Manish. Please advise if you are sure that you need true nickel-chrome plating on your bakelite, as opposed to chrome-like paint. Our FAQ, "Introduction to Chrome Plating" may be useful. If you require true nickel-chrome plating, what are the exposure conditions and expectations, because bakelite does not offer the etchability and consequnet good adhesion of ABS.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: