Curated with aloha by
Ted Mooney, P.E. RET
The authoritative public forum
for Metal Finishing 1989-2025
-----
Need anodizing of a jukebox frame
August 2, 2009
I need an aluminium extrusion from an old 50s jukebox re- anodized. It is a frame.
There are four pieces approx. 8' (feet) in total.
Two sides are 34".
The other two are 10".
The extrusion is 1" wide.
Color: silver
|
Mark Addleson hobbyist - Centreville, Virginia Ed. note: This RFQ is outdated, but technical replies are welcome, and readers are encouraged to post their own RFQs. But no public commercial suggestions please ( huh? why?).
(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it) Q, A, or Comment on THIS thread -or- Start a NEW Thread Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful. If you are seeking a product or service related to metal finishing, please check these Directories:
Finishing About/Contact - Privacy Policy - ©1995-2025 finishing.com, Pine Beach, New Jersey, USA - about "affil links" |