Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Seeking Automated Precious Metal Plating Line

adv.

Hi all,

RFQ: I am an electroplating engineer currently employed by a health care company which manufactures less invasive medical devices. I am interested in anybody's experience of a product called the RFT Plater (Rotary Flow Thru) manufactured by Griego Electrochemical Technologies Inc. I am considering automating a precious metal plating line and would be grateful for any information or recommendations anyone may have with regard to the above.

Regards Sean.

Sean [last name & town deleted for privacy by Editor]
2000

Ed. note: Sorry, this RFQ is old & outdated, so contact info is no longer available. However, if you feel that something technical should be said in reply, please post it; no public commercial suggestions please ( huh? why?)

Dear Mr. Pullizzi,

I recently published a letter #4210 on the web site and the response I have received has been terrific. Lots of information. However my voice mail has become jammed with messages from vendors. Can you delete this letter as I have information overload!

Yours Gratefully,

Sean

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: