No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Translucent mirror finish on acrylic?

I am looking for a supplier who can apply a semi-mirror finish (possibly by sputtering) onto clear acrylic for prototype and/or production automotive use. The finish must have a high reflective quality while maintaining some translucence. Thank you for your responses.

Dave Cook
- Southfield, Michigan
2000

Ed. note: Sorry, this RFQ is old & outdated, so contact info is no longer available. However, if you feel that something technical should be said in reply, please post it; no public commercial suggestions please ( huh? why?)

I am interested in purchasing acrylic sheets with half silvering on one side. Please contact me if you sell such a product or know where I could purchase such a product. Our vision is to use this material in relatively large quantity. We are also interested in techniques to place half silvering on an acrylic sheet in a pattern rather than uniformly across the sheet. Are there techniques to achieve this goal at a cost compatible with the automotive industry.?

Leonard S. Haynes
Potomac, Maryland USA
2003

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: