No cost, no passwords, no popups
(earnings from 'affiliate link' purchases make the site possible)

Curated with aloha by
Ted Mooney, P.E. RET

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing 1989-2025

-----

Nikasil on plastics

We're involved in a project which needs to electroform a thick Nikasil shell (2-3 mm) on plastics (ABS). We can provide metallized parts but need help for Nikasil plating. If you happen to know the companies which can provide this kind of services, especially in Canada or USA, please say. We would appreciate your help very much. Best regards! Ke

Ke Zhang
Queen's Uni. - Kingston, Ontario, Canada
1999

Ed. note: This RFQ is outdated, but technical replies are welcome, and readers are encouraged to post their own RFQs. But no public commercial suggestions please ( huh? why?).

ke, we are doing electroplating on abs. please inform what is "nikasil". is it nickel sulphamate? thank you, daniel

daniel livshitz
- tel aviv israel
1999

Gentlemen, please start with letter #1671 which will answer your questions, and includes further links to other letters on related subjects. Good luck.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: