Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Need E-coating Service

2004

Need APPROVED shop for applying Mil P-53084. Need shop who is capable of E-coating, I.A.W. Mil-P-53084. Must be able to meet requirements set by Government. This would be large (qty) scale. Parts would be mostly Aluminum, but with some steel. We would produce the holding racks for the parts. If Zinc Phosphate is in their process, that would have to be Government approved also. We have dealt with E-coaters that claim to be approved, but turns out they are only using the product which was approved, please only serious shops that understand the requirements.

Steve O [last name deleted for privacy by Editor]
Metal Manufacture / Defense Contracts - Olean, New York

Ed. note: Sorry, this RFQ is old & outdated, so contact info is no longer available. However, if you feel that something technical should be said in reply, please post it; no public commercial suggestions please ( huh? why?)

2005

Need TS 16949 E-coating for Automotive OES Products. I work in the Service division of a major automobile manufacturer and currently I am looking for an E-coater that has the capability to process material that measures a minimum 110 inches in length. This company must be able to pass stringent quality control standards and be TS16949-certified and have the ability to handle very high volume of multiple products.

Maurice M [last name deleted for privacy by Editor]
Manufacturing - Spartanburg, South Carolina, USA

2006

I have 3 pounds of acorn nuts that I am trying to get black E-coated. We don't deal in large quantities of the same item but do have a lot of items we would like done like this.

Holly M [last name deleted for privacy by Editor]
- Sawyer, Michigan

2007

Need e-coating supplier in Tijuana , Mexicali or San Luis Rio Colorado Mexico.

Thanks

Alonso Gomez
Metal Manufacturing - Tijuana, Baja California, MEXICO

October 6, 2009

Does anyone know of any e-coaters in Chicago

Kit S [last name deleted for privacy by Editor]
Manufacturer - Itasca, Illinois, United States

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: