No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Refinishing stainless steel with a brush finish

I have ruined the look of my brush finished stainless steel cook top by using cleaning abrasives to clean baked on grease. Is there a way that I can restore the orignal brush finish, a certain kind of brush etc...

Thank you,

Mark Schroeder
technical illustration - Alameda, California, USA
2003

I also have ruined the finish of my fridge. Any hope?

Ann

Ann Frisina
- Minneapolis, Minnesota
2007

I also would like to know how to restore the brush look to several spots on my stainless steel refrigerator.

David Gilstrap
- Leesburg, Virginia
June 25, 2008

Hi, folks. Unfortunately this thread is duplicative of other threads on the same subject, so it is not receiving much attention or publicity. Please see letter 4148 for a very popular thread on the subject.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
June 25, 2008

adv.
this text gets replaced with bannerText

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: