Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Cleaning cast iron bell

How do I clean a cast iron bell that is outside. Also can it be varnished or what would you coat it with.

Please advise. Thank you.

Linda Ness
- Saskatchewan, Canada
2002

We have the exact same question about how to clean an outside cast iron bell. It's dated 1898. Can we just sand it and paint it with an outdoor rust-o-leum or is there a better way? Thanks for your help.

Ken Novak
- Mission Viejo, California
April 4, 2009

Hi, Linda. Hi, Ken.

Others had the same question, too. Letter 22334 offers at least one recommendation. Patient application of the search engine will yield additional related threads. Good luck.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
April 5, 2009

this text gets replaced with bannerText

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: