Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Nickel plating process - please explain it

To whom it may concern:

I want to know about the nickel plating process. Would you please tell me about some links or bibliography?

Thank you!

Ernesto Ruiz
- Mexico
1998

You might want to start with the Metal Finishing Guidebook, which will give you an introduction to most common plating processes. For greater detail you might consider Nickel and Chromium Plating [on on Amazonaffil links] by J. K. Dennis, et al.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

I am looking for a company to Nickel Plate some products for me in the central IN area.

Greg Shepherd
- Shelbyville, IN
1999

Ed. note: Sorry, this RFQ is old & outdated, so contact info is no longer available. However, if you feel that something technical should be said in reply, please post it; no public commercial suggestions please ( huh? why?)

Please see our Jobshops Directory, Greg. Good luck.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
1999

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: