Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

How do I protect copper in both interior and exterior use?

How do I seal copper for interior and exterior use?

Richard J. Manchester
- Melbourne Village, Florida, USA
2001

Hi, Richard. This question has been answered several times if you can catch some luck with our search engine. But brass lacquer ⇦this on eBay or Amazon [affil links] or a clearcoat can be appropriate, and if you can precede it with a corrosion inhibitor for copper like benzotriazole ⇦this on eBay or Amazon [affil links] it should be good outdoors.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
July 3, 2008

this text gets replaced with bannerText

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: