Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Source for ASTM and ISO electroplate zinc yellow dichromate standards

Q. I would like to obtain copy ASTM and ISO Standards for Zinc yellow dichromate electroplating. Please advise source(s) for these Standards.

Danial G Turnbull
Tompkins Industries - Olatthe, Kansas, USA
2001

A. ASTM standards can be obtained from ASTM at astm.org for a fee, of course! ISO and other documents may be purchased from Global Engineering at www.global.ihs.com.

Cynthia Meade
National Exposure Testing - Sylvania, Ohio

A. Hi Danial
You can also simultaneously support finishing.com and save some time by following our links. Techstreet is a specs clearing house and offers us a small commission which pays for our time hotlinking specs so they're one click away and current.
The most referenced ASTM spec for zinc plating and chromating is probably ASTM B633, and ISO 2081 may be the most common ISO one. You can search the site for numerous discussions about zinc plating and yellow chromating which will reference additional specs. Luck & Regards,

ted_yosem
Ted Mooney, P.E. RET
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: