Hobbyists & Industry luminaries alike learn on every visit
(we earn from 'affiliate link' purchases)

Curated with aloha by
Ted Mooney, P.E. RET

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing 1989-2025

-----

Hydrogen Control for Enclosed Anodizing

I am looking for information to properly scale the ventilation rate for an enclosed aluminum anodize tank. The concern is buildup of hydrogen during processing. How do I determine the minimum flow to keep hydrogen below 10% of the Lower Explosive Limit?

G. C. Hannabarger
- Chula Vista, California, USA
2001

2001

Faraday's Law of Electrolysis should work here. Each Faraday of electricity (96,485 amp-seconds) should release one gram equivalent weight of hydrogen. Ted Mooney, finishing.com
Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: