Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Cast iron grade for outside sculpture

In a recent meeting with a metalurgist he mentioned that there were 12 grades of iron which could be used for casting. What would be the grade(s) for outside sculpture and what distinguishes this iron?

Matthew T [last name deleted for privacy by Editor]
- Faifax, VirginiaA, USA
2001

Cast iron for sculptures should be of high chromium so as to be less corrosive, and resistant to weather conditions.

Aalok Singhi
Singhi Metal Cast Pvt Ltd - India
2006

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: