Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Vibratory Barrels For Plating

We are consultants to the metal finishing industry and have a client who is looking for a source of vibratory barrels for electroplating. Preference is for purchase of the entire system. However, we would consider purchase of separate components, e.g., motor, barrel, and do assembly on our own. Parts are very small and delicate in some cases.

BERT J. SHERWOOD
- Los Angeles, California
2000

Hello, Bert.

As far as I know there are no domestic manufacturers of vibratory barrels, although there have been domestic distributors from time to time and there may be some now. But you can contact STS Industrie S.A. for vibratory barrels.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
2001

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: