Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Sterilizable Stainless Steel Coloring Process Needed

I am searching for a coloring process for 304 Stainless Steel that can withstand all of the sterilization and cleaning processes used in the medical industry including steam autoclave, peroxide plasma, steris, sterrad, etc. It also needs to be scratch resistant.

Toniel Speidel
- Syracuse, New York USA
2000

2000

Hi, Toniel.

I suggest you contact B&M Finishers / Prismatic Stainless Steel [a finishing.com supporting advertiser] [Kenilworth, NJ] about their Prismatic process for coloration of stainless steel. I don't know if it would hold up to these requirements, but I think it's a lead worth following.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

adv.

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: