Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

How to prevent fungus on plastic chromed surface in production.

Q. How to prevent fungus from growing on plastic chromed parts.
We are doing copper, nickel, chrome plastic plating.
We send our parts by sea to our customer and need 45 days to reach our customer.By the time my customer receive, most of the parts already have fungus. Can anybody help on this issue?

Eimiin Gho
- Johor Malaysia
July 17, 2020

A. Hi Eimiin. Is there any bare plastic involved? Are you sure the fungus is able to grow on the nickel-chrome plated surface as opposed to the packaging? I personally haven't heard of fungus growing on a nickel-chrome surface. Do you do any spray or post-treatment of anything onto the surface of the chrome?

Luck & Regards,

Ted Mooney, P.E. RET
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
July 2020

Junior Sales Representative - Resintech, Camden, NJ
Nadcap Chemical Processing Auditor - PRI, traveling
Process Engineer / Chemist - Denver Metal Finishing, Colorado

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: