Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Impact of power cut on anodizing coat and colour

Q. During anodizing process a part is in the tank and there is a power cut, it will take at least 5~10 mins for restore of power to rectifier of anodizing tanks. Please tell me the impact of this power cut off on coating and color of that part.

Kindly tell me how to overcome this issue or what are solutions for this.

Kapil Bhardwaj
Surface Treatment employee - Delhi, India
October 12, 2017

A. The parts should be stripped and restart processing.

Ryan Underwood
PPC - Savannah, Ga, USA
October 18, 2017

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: