No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Safety of locating anodize rectifiers near painting & powder coating

February 27, 2017

Q.
Dear Experts,

We have in-house finishing process including painting, powder coating and chromate conversion coating under one roof. My question is we want to set up Hard anodize coating under roof (adjusting to the powder coat and painting).
1. Tell us is it acceptably safe.
2. If so what are safety measures to be taken.
My concern is painting and powder coating are fire prone zones, but in hard anodize coating, rectifiers, compressor and freezers are set up couple of feet away.
If such situation what needs to be done?

Regards,

Manjunath Madiwalar
Process Engineering Manager - Bangalore , Karnataka, India

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: