No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Clear UV coating on digitally imaged polycarbonate

October 27, 2015

Q. I've been brought on board with a company that is planning to put in a screen printing line for the purpose of applying a uv clear coat over digitally imaged polycarbonate sheets, the end use is a cel phone jacket. We've tried screen printing and it seems to work o.k., a little difficult to ensure consistent application and film thickness but we can probably get that under control. I'm wondering if there are any other methods of application that might be an option for us. This would be high speed manufacturing.

Kelly St. John
employee - Hollister, California, USA
s

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: