Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Electroless nickel plating of fly ash

February 27, 2013

Q. Sir I want Electroless nickel plating on Fly Ash. In that process generally using palladium chloride as an activator. But it is very costly powder. Please tell me an alternative activating powder for Fly Ash.

Umakanth Amirineni
- Vijayawada, Andhra pradesh, India

A. Hi Umakanth. I am a bit lost so please educate me before I can help you. To my knowledge fly ash is the product of combustion (usually the combustion of coal) that floats up the flue and is captured on electrostatic precipitators. Why would someone attempt to electroless nickel plate this waste product? Thanks.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
February 27, 2013

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: