Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Electroplating or electroplating of 'Aluminium Filled Epoxy'

Q. HI,
My name is Rajesh I'm a post graduate student who is working on academic research project.
please let me know that "ALUMINUM FILLED WITH EPOXY" can be plated with nickel or copper or any other alloys so that it should meet Matte finish

if anyone knows regarding above content please help me out

Rajesh R
- Bangalore, Karnataka, India
August 28, 2012

A. Hi Rajesh. Aluminum can be zincated, then alkaline electroless nickel plated, and it can then be plated with nickel or copper or whatever.

Depending on how much aluminum is in the epoxy, how exposed it is, etc., the zincating process may or may not work. Good luck.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
August 29, 2012

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: