No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing 1989-2024

-----

Test for completeness of copper plating removal from Cr-Co steel

Q. Can anybody suggest a quick method to confirm that copper plating has been fully removed from the surface of a 10% Cr, 6% Co steel

Graeme Rolfe
engineer - Leicester, UK
June 27, 2012

A. Hi Graeme
I have always found the Mk1 eyeball to be very effective.

Geoff Smith
Hampshire, England
June 30, 2012

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: