Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Need Full Service Plater and Powder Coater for Zinc Die Cast

Looking to establish relationship with a plater and Powder Coater for Zinc Die Cast Entry Door Parts. #3 Brass, # 15 Satin Nickel and others. Must have ability to Clear Coat after plating.

Bert Inabinet
Manufacturer - Colfax, North Carolina, USA
October 14, 2011

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: