Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Function of solution components in Electroless Nickel Plating

I am having three doubts in Electroless plating
1. How the stabilizer works in plating solution without affecting the coating
2. Why Phosphorus content is decreasing when pH is increased?
3. Why hardness of Ni-P is more than electroplated Ni? (HPEN harness is less than LPEN)

thanks in advance

ANVER

Anver Sulaiman
Student - Mysore, Karnataka, India
October 12, 2011

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: