No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Production of copper sulphate from scrap/by product sulfuric acid

how can I make production of copper sulphate ⇦ this on eBay or Amazon [affil links] from scrap/by product sulfuric acid

Sumit S.
student - Thane
October 12, 2011

October 12, 2011

Hi, Sumit.

Please tell us more about your student project. Elementary school level or post doc? :-)

Copper does not substantially and directly dissolve in sulfuric acid, but copper oxides (tarnishes) will. So you can get "some" copper sulphate by just putting tarnished scrap in the acid. But to dissolve the copper into solution requires an oxidizing agent or method. Good luck.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: