Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

What is "hot dog" tin plate

What is "hot dog" tin plate?

Mark Rectenwald
QC Analyst - Oconomowoc, Wisconsin
September 14, 2011

Hi, Mark.

Please take the time to offer some context. Are you reading this on a drawing, or reading about it in a book, or you just overheard fellow passengers on an airplane? I've never heard of it, and without context my first guess would be that it was a mis-heard corruption of "hot dip" tin plate.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
September 15, 2011

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: