No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Plated baby shoes

I just had some baby shoes plated and was wanting to see if someone on here could look at some pictures and let me know if this is how they should turn out. I am so unhappy with them I could cry. If someone could please help me with this I would appreciate it.

57503-1 57503-2 57503-3

Stephanie Sendrowski
- Rowlett, Texas
July 29, 2011

Well I have seen plated baby shoes before and the ones in your pictures certainly look like others I have seen. Either that or some one has painted them silver. Are they not supposed to be plated?

Rod Henrickson
gunsmith - Edmonton, Alberta, Canada
August 8, 2011

Probably shoes are silver plated electroformed copper,probably clearcoated too. Remove old clearcoat (try acetone ⇦ this on eBay or Amazon [affil links] Warning! highly Flammable! ), polish with silver polishing cloth and clearcoat them again. Hope it helps and good luck!

Goran Budija
- Cerovski vrh Croatia
August 10, 2011

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: