Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Need Process and Plant for Anodizing Magnesium Sheet

July 27, 2011

Dear,

What process is used to anodize Magnesium sheets for pretreatment to manufacture engraving sheets for printing purpose?

Magnesium sheets to be anodized 600 mm x 900 mm with thicknesses 1.5 - 3.0 - 5.0 - 7.0 mm.

Who are the companies that can supply a pant for magnesium sheet anodising for that purpose?

Erol Deniz
Buyer - Istanbul, Turkey

adv.
this text gets replaced with bannerText

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: