Hobbyists & Industry luminaries alike learn on every visit
(we earn from 'affiliate link' purchases)

Curated with aloha by
Ted Mooney, P.E. RET

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing 1989-2025

-----

Hardcoat Anodizing of series 20xx Aluminium

June 27, 2011

HI!
We are Anodizers of aluminium . We are able to perform hard anodizing on 60** series of aluminium but we are not able to anodize 2024&2014 aluminium alloys.

We want to
1) Hard anodize 2014/2024aluminium alloys . coating raning from 45 - 60 microns.
2) We want to black anodize 2014/2024 aluminium alloys . Coating ranging from 15-25 microns.

Please suggest us the process and methodology.

Thanks & regards

Anand

Anand yadav
anodizer - Bangalore, Karantaka, India

Hi, Anand.

It is not a surprise that you are having difficulty hardcoating 20xx aluminum. Please search the site for "hardcoat 2024" and you will see many previous discussions on the subject. Good luck.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
June 28, 2011

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: