No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Electroforming Oxygen-Free Copper

We are experimenting trying to produce oxygen free copper. We would like to get down to less than 5 ppm (parts per million) but so far have achieved between 8-10. There are a couple things we still have to try such as ultrasonics and oxygen free atmospheres. Is anyone aware of any commercially available additive solutions that may help that are specifically designed to eliminate oxygen?

Andrew McClusky
business owner - Manchester UK
June 12, 2011

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: