No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Suggested metal or coating for dryer for ferrous sulphate

We have Rotary vacuum dryer and Dry ferrous sulfate ⇦ this on eBay or Amazon [affil links] in it at 180° C temperature & high vacuum condition. Suddenly we found that Dryer is corroding and oil is leaking from shaft. Please give your suggestion to repair this dryer either by coating with some other material or replacing SS 316 with another metal.

Patel Divyang Bhulabhai
chemical business - Navsari, Gujarat, India
May 21, 2011

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: