Metal finishers helping each other -- No cost, No registration, No damn popups
(we earn from 'affiliate link' purchases, making the site possible)

Curated with aloha by
Ted Mooney, P.E. RET

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing 1989-2025

Thread 57/80

Need Surface Energy Kit

I would like to know information about "surface energy kit". We use it to find out condition of body surface molded by thermosetting resin,before we mark by ink. We have a surface energy kit "ARCOTEC".This is a pen type, 8 ea/set. The unit of a kit is dyne/ß�, a kit gets a value of to 44 from 30. We want to get a value under 30. If you deal with a surface energy kit, please send me a information about price, feature,and how to use of it.

Heesung Koo
Seoul, Korea
2000
publicly reply to Heesung Koo

I understand the problem. We manufacture a broad range surface energy test kit that spans from 22 to 70 dynes.

There is a danger in pen-type surface energy tests. The fluid in the pens is a powerful solvent. If it disposes contamination on the surface, it is absorbed into the pen. This will lead to faulty reading from there and into the future.

Charles S.Leech Jr
- Glendale, Arizona, USA
2001
publicly reply to Charles S.Leech Jr

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: