Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Chloride problem in copper stripping bath

We face unstrip problem in our copper stripping bath when it's chloride content goes more than 1 ppm.

Bath composition : Sulfuric acid
: Hydrogen peroxide
: Cu51
Temperature : 35C

How to reduce the chloride content ?

Kogelan Jeyacelan
Lab Technician - Malaysia
February 23, 2011

If the chloride concentration is low and known add an equivalent amount of silver salt to precipitate as insoluble silver chloride

Geoffrey Whitelaw
- Port Melbourne, Australia
February 27, 2011

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: