Hobbyists & Industry luminaries alike learn on every visit
(we earn from 'affiliate link' purchases)

Curated with aloha by
Ted Mooney, P.E. RET

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing 1989-2025

-----

Test Equipment to detect SUS under sputtered layer

We are making keymats . For our Thai factory and one of types we have SUS plate and above a PC material with sputtering process . I would like to detect the SUS from the upper side so the sputtering will not interfere with the test. Is there any equipment to meet such a demand ?

Thanks

Rafi Adlersberg
Keymats including plating , sputtering , painting , UV coating , etc - Rehovot, Israel
February 23, 2011

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: