Hobbyists & Industry luminaries alike learn on every visit
(we earn from 'affiliate link' purchases)

Curated with aloha by
Ted Mooney, P.E. RET

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing 1989-2025

-----

Recent improvements to trivalent chromate surface finishes

Has there been a change recently in the solution that is used for plating parts with trivalent chromate? More to the point, has there been a new additive to this solution that speeds up the curing time for the finish to hardened? Also, has something been introduced to increase/decrease the coefficient of friction on the surface?

Thanks

Dan Lubera

Dan Lubera
Application Engineer - Chesterfield, Michigan
February 9, 2011

Hi, Dan.

To my knowledge there is nothing approaching a "generic" trivalent conversion coating yet. 50 brands / 50 different processes. So it is certainly possible that one or more vendors has made recent changes to their list of offerings.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
February 9, 2011

FYI- Chromate is a conversion coating, not plating. Trivalent chrome plating is similar to hexavalent chrome, but can only be applied in thin thicknesses.

James Watts
- Navarre, Florida
February 10, 2011

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: