No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Safety Manual for Electroplating

As a Loss Control Specialist for a private Insurance Agent, I'm involved in helping commercial clients become more of an "insurable risk". I've a client that has asked me to assist them in improving their Safety Manual. Can anyone provide me with a copy of an Electroplating Industry Safety Manual?

Kevin Epley
Loss Control Specialist - Springfield Illinois
September 27, 2010

Hi, Kevin.

There is no such book that I'm aware of at this time, but there are booklets and technical articles. Inquire of NASF at www.nasf.org if they still have "Safety Tips for Operators of Metal Finishing Equipment", which is a booklet I wrote for them about 15 years ago, and of which they distributed thousands of copies. A literature search will produce many articles like Frank Altmayer's "Safety in Surface Finishing", printed in P&SF in 1991, and countless others. Metal Finishing Information Services in Birmingham England can do a lit search for you.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
September 28, 2010

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: