No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Acceptance of Stainless Steel SS304 in Pharmaceutical Industry?

Is SS 304 is acceptable in pharmaceutical field? If not , what is the remedy for that?

Tarun Mandal
Employee - Hyderabad, India
May 10, 2010

Hi, Tarun. "Pharmaceutical field" is a fairly broad and inexact term, but electropolished type 316 stainless steel should be used where cleanliness is paramount. Good luck.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
May 10, 2010

Tarun,

It is preferable to use 316L SS. It should be passivated and the passivation quality should be ensured periodically.

T.S.N. Sankara Narayanan
- Chennai, Tamilnadu, India
(ed.note: The good doctor offers a fascinating blog, "Advancement in Science" )
May 12, 2010

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: