Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Substitute for sulfuric acid for electro polishing stainless steel

March 30, 2010

I am looking for Substitute for sulfuric acid for Electro polishing solution for stainless steel as it causes rust in the box joint type instruments.

Regards

Fais

Faisal Akram
worker - Sialkot, Pakistan

March 30, 2010

Hi, Faisal, the Electroplating Engineering Handbook [on AbeBooks or eBay or Amazon affil links] lists numerous formulations for electropolishing, and these days there are a number of proprietary low-acid or non-acid formulations available.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: