No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Cleaning rust from iron siding

How do I clean the rusty areas from my home? We bought the home with the siding on it. In just a few small areas the siding has rusted. How do I clean these small areas and then what can I do to paint and protect the areas. Need help please.

Joan Cowley
Home owner - St. Petersburg, Florida, USA
March 20, 2010

Hi, Joan. Sand off anything that is loose and flaky; then apply rust converter ⇦ this on eBay or Amazon [affil links] before priming.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
March 22, 2010

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: