No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Dry Film Lube on Stainless Steel

March 17, 2010

We specify Dry Film Lube per MIL-PRF-46147C on external threads of an Aluminum part.

We are about to make the same part in 316 Stainless Steel.

I do not have access to the above reference document.

Any suggestions on what the dry-film lube specification needs to be on the stainless parts

Raju Penumatcha
Engineer - Plano, Texas, USA

Hi, Raju. May as well put A-A-59004 as your spec I suppose. I just glanced through it, didn't really study it, but what the heck.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
March 19, 2010

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: