Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Need a dull black finish on an Aluminum structure

What can I use to give an Aluminum structure a dull black or satin black finish?

Bruce Gesek
technician, aerospace - Moffett Field, California, USA
December 29, 2009

Hi, Bruce. Based on your location and description, I'm assuming this 'structure' is something akin to a tower or a bridge and is outdoors. I think it would prove very difficult to uniformly anodize or chemically treat such a structure, and that what you should do is pretreat it or prime it and then paint it with a satin or matte black paint.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
December 29, 2009

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: