Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Finishes available for music wire springs

I have a jewelry business and would like to utilize a small diameter spring for some costume jewelry pieces. The spring manufacturer proposes using 22 gauge music wire ASTM A228. The springs will be 3" to 6" in length and will not carry a load. What finishes, if any, are available for music wire that are: (a)non-allergenic,(b)available in a variety of colors,(c)are color fast and (d) hopefully, cost effective?

Ray Noack
product designer - Crawford, Texas, USA
December 11, 2009

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: