No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

RABiTS Nickel

Hi, I work on coating on RABiTS Nickel. I need to increase the wettability of the surface to coat aqueous solutions. I need to know, if cleaning with 50%Nitric acid+ 50% water mixture at 50°C destroy the texture of the rolled Nickel? or, how to increase wettability without destroying orientation of nickel?

Swarna babu
Student - Chennai, India
December 11, 2009

Ed. note: For those unfamiliar with RABiTS, there is an excellent intro at www.oe.energy.gov/DocumentsandMedia/RABiTS_fact_sheet.PDF

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: