No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Electroforming copper onto glass

I am a glass blower and would like to try electroforming copper ontgo my glass vessels...do you know of any books/manuals etc to help me...or give me some clues of your own...I would be very grateful.

Louise Cloke
student - Plymouth, U.K.
November 9, 2009

November 11, 2009

Book on Electroforming by P. Spiro is still today good starting point. Oppi Untracht's books are very good too -- (detailed description of used processes -- Jewelry Concepts and Technology ⇦[this on Amazon affil links], New York 1980., Metal Techniques for Craftsmen ⇦[this on Amazon affil links], New York 1968.) Any better book on jewelry making must have chapter on electroforming.There are some download free old books (19-th century) at internet archive website(www.archive.org).Hope it helps and good luck!

Goran Budija
- Cerovski vrh Croatia

Thank you for your help...I found all information useful and a jewelry book, Electroforming ⇦[this on Amazon affil links], by Leslie Curtis which is great.

Louise Cloke
student - Plymouth, U.K.
December 7, 2009

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: