Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Removing ammonia from household wastewater

How to control the ammonia from waste water that is coming from household water? I am controlling by irrigation method. But by using this method some ammonia decrease. Our requirement is that maximum ammonia be removed from water. Inlet water has 67 mg/l ammonia come, but by using irrigation method ammonia remains 40 mg/l. Please tell me how to control this?
I shall be very thankful to you for this.

Muhammad Sadiq
chemist - Abha, Riyadh, Saudi Arabia
October 23, 2009

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: