Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Modifying a +5 deg. C freon chilling plant of 98TR for -25deg. c

September 20, 2009

I am working in a private organisation, in which we have one chilling plant of 98TR at +5deg.c

Due to some product launching we require immediately -25deg. c cooling, so we are planing to modify the existing plant without replacing the chiller and condenser.
pl advice

Venkat Pinnamaraju
Dept.Manager - Hyderabad, Andhrapradesh, India

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: