Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

What metals do not form an alloy with silver at room temp

I am trying to plate two metals one of which must be silver or gold (preferably silver), but I need a clean interface between the metals. What metals do not form an alloy with silver or gold at room temp? Thanks

Eric

Eric Lewandowski
Researcher - Philadelphia Pennsylvania
September 2, 2009

Hi, Eric. Nickel is probably the most widely used metal for preventing diffusion between copper, silver, and gold.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
September 2, 2009

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: