Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Building an electroless nickel rack

I am a Chemical Engineering student and I am interested in building a rack to plate in an electroless nickel bath. I was wondering what kind of considerations I would need to take into account when selecting materials, coatings, etc.

Regards,

Eric Giddings
Student - Toronto, Ontario, Canada
July 13, 2009

Hi, Eric. See if your school or city library has a copy of the Electroplating Engineering Handbook [on AbeBooks or eBay or Amazon affil links] . It has a chapter on plating rack design. Good luck.

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
July 14, 2009

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: