Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Hard chrome plating over black chrome

July 8, 2009

I would like to know how to plate hard chrome over black chrome (or black nickel.
Is any adhesion problem will occur ?

Thanks you very much

André Bournival
Process technician - Sherbrooke, Qc, Can

July 9, 2009

Hi, André. This is an unusual application and I have no experience in it. But I would anticipate problems based on the fact that these black platings are deliberately contaminated and are probably not one hundred percent metal. Why do you need to do this strange process?

Regards,

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

adv.
this text gets replaced with bannerText

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: